The Department of General Services (DGS) conducts annual G-MAX testing on synthetic turf fields in all eight wards to assess where maintenance is required. G-MAX testing is a surface hardness impact test and is the most commonly used standard set by the American Society for Testing and Materials (ASTM) International which established a G-MAX value of 200 for the maximum allowable limit for safety.
G-MAX is a stringent test method which scores 10 high-use areas on each field. A single score of more than 200 at any of the District’s synthetic field locations results in temporary, short-term closure of the field to carry out necessary maintenance. Remediation of fields can range from providing minor infill top-off (2-3 days completion) to providing sectional replacements (2-3 weeks completion).
DGS has followed a new set of field turf protocols developed by the District’s Interagency Working Group on Artificial Turf and Playgrounds to ensure that necessary steps are taken to communicate this information to DCPS and DPR and the public. Artificial turf field communications protocols began in March 2019.
G-MAX testing measures the shock absorption of synthetic turf. The results indicate how much shock an athlete absorbs when impacting the turf. As the G-MAX value increases, the field becomes harder, and is less likely to absorb shock. These measurements are a fundamental tool alerting you to critical compaction issues and the possible need of additional infill -- keeping your field safe and limiting injuries.
G-MAX values increase with high usage, compaction, and infill segregation. These values can be reduced by grooming or top dressing your field.
For synthetic surfaces, American Society for Testing and Materials (ASTM), specifies that the reported G-MAX value for all test points on a field should be less than 200 G-MAX (as measured in accordance with ASTM procedures F355-A and F1936). If the standard isn’t met, the field is considered in need of maintenance and remediation is required.
The shock tests, also called “drops,” are done 3 times in 10 separate locations. The results are recorded in the report.
The report provides general information on the location site name, address, date, time, weather, and average test score of all 10 test locations. The individual drops and average scores are used to inform maintenance activities. The report includes a test matrix that depicts the results each of the 3 drops at each of the 10 locations totaling 30 drops. It also records the depth of the field material at each test location. Any one drop that is recorded above ASTM standards will be highlighted and the field is considered in need of maintenance. Finally there is an areal image and description of all test locations on the field.
|Ward||Location||Projected Reopen Date|
|Location||Projected Reopen Date|
|Ward 4||Upshur (DPR)||November 2020 (Field Replacement)|